2 Port and 8 Port Adapters

Availability

Effective immediately, the new 2 port adapter and a new 8 port adapter are available for SwyxWare.

Product Details

The ZXS00003 and ZXS00004 terminal adapters refer to the AudioCodes H.323 multi-port gateways which can be used to connect analogue devices such as phones and fax.
The ZXS00013 and ZXS00014 terminal adapters vary from the ZXS00003 and ZXS00004 terminal adapters only in the respect that the new terminal adapters support SIP. The ZXS00013 and ZXS00014 terminal adapters have the same configuration and functionality except for the number of channels that are available.

Part Number Description £ List Price

ZXS00013 IP a/b Adapter 2 Port for SwyxWare (SIP) £259
ZXS00014 IP a/b Adapter 8 Port for SwyxWare (SIP) £859

Pricing

For full details of pricing, resellers should contact iptelecoms.

Notes on compatibility

The new 2 port and 8 port adapters will work with SwyxWare V5.00; they will not work with SwyxWare V4.40 or earlier versions of SwyxWare.

Customer scenarios

1. A customer is running SwyxWare V4.40 with an ‘old’ 2 port or 8 port adapter and upgrades to SwyxWare V5.00. In this scenario, they can continue to use the ‘old’ adapter.
2. From now on, orders for 2 port or 8 port adapters will be fulfilled with the new adapters. (This is on the assumption that the software shipped with the order is V5.00 as it is the current release.)
3. Customers with a 24 port adapter board will not be affected as there is no SIP equivalent so they will continue to connect the a/b adapter via H.323 regardless of the version of SwyxWare they are running.
4. A customer running SwyxWare V4.40 (or earlier/older versions) would like to connect analogue phones to their SwyxWare solution. ‘Old’ adapters will be available for a few months but the customer would be better advised to upgrade to SwyxWare V5.00. This means that customers could take advantage of the new functionality within V5.00 and could have T.38 fax support.

SX2 Dual PRI Card

Availability

Effective immediately, the new SX2 DualPRI card is available for SwyxWare.

Product Details

Key Features of New SX2 DualPRI Card

Up to 4 cards from the SX2 family of products can be installed in one PC. Note: The SX2 DualPRI counts as two cards when installed; it will also show up as two network devices in the windows device administration.Up to 76 B-Channels per PC are supported.

Configuration Examples

1. One SX2 DualPRI card + two SX2 QuadBRI cards.
2. One SX2 DualPRI card + one SX2 DualPRI card with fractional E1 (8channels per PRI).
3. If two SX2 DualPRI cards are installed with 30 channels per PRI, a maximum of 76 B-Channels will be supported.
Each port can be configured separately to TE/NT mode with a Jumper field.
Line-termination (120 Ohm resp. 75 Ohm) is independently selectable for each port. by DIP switch.

Part Number Description £ List Price

EXSG00060SX2 SX2 DualPRI Card (2xPRI) £699

Pricing

For full details of pricing, resellers should contact iptelecoms.

Notes on Compatability

The new SX2 DualPRI card uses a new driver (available on the iptelcoms.com website and included in the SwyxWare V4.40 CD). The board will work with SwyxGate version V4.33 or newer. SX2 DualPRI cards do not support T.30-Fax Transmission, e.g. only SwyxFax V2.00 or newer can run on these cards.